The Elektra VCD Cable is installed in rooms which are under construction and the floor is not finished. It generally serves as primary heating and is the only source of heat in the room. When it serves as a supplementary heating source ("The Warm Floor Effect"), a primary heating system is required. The Cable is installed on top of a insulation using either a staple or a fixing strap to secure the cable until the screed is laid.
Manufactured in Europe complying with ISO 9001 using the highest quality raw materials, in accordance with IEC EN 60335-2-96. Elektra electric in screed underfloor heating cables have gained many approvals around the world.
Lifetime guarantee is available for Elektra VCD17 Underfloor heating cables and UK based technical support for the installation / operating of the underfloor heating is provided by our experienced & qualified technicians.
|Cable Thickness||5mm x 7mm (Max)|
|Min Installation Temp||-5oC|
|Max Working Temp||+95oC|
|Cold Tail||1No. 2.5 metres long - 3 cores|
|Outer Sheath||Heat Resistant PVC|
|Output Power Tollerance||+5%, -10%|
|Min Bending Radius||3.5D|
- Insulation should be rigid PUIR.
- Some insulation / screed combinations require a vapour barrier to be installed directly on the insulation before you install the cable and lay the screed.
- To comply with building regulations, you should use a minimum 65mm sand / cement screed or 50mm pumped screed.