This Elektra WoodTec 140W/m² Underfloor Heating Mat comfortably covers 85-90% of a area. The ELEKTRA WoodTec heating mats are incredibly thin at 2.8mm. All ELEKTRA WoodTec heating mats are fully earth utilising an aluminium shield covering. The 100% earthed ELEKTRA WoodTec heating mats can be installed in wet areas in full compliance with electrical & building regulations.
Heating cables are attached to a fiberglass mesh and covered with aluminum foil on the reverse side. The aluminum foil provides a protective shielding (earth) for the heating cables. Each heating mat is 500mm wide. Due to the miniscule thickness, they are commonly used in places where the floor can not be raised too much. It is possible to install two or more mats in a single room. In this case the mats should be connected in parallel.
You will also need a 6mm insulating underlay that can be purchased here
Manufactured in Europe complying with ISO 9001 using the highest quality raw materials, in accordance with IEC EN 60335-2-96. Elektra electric underfloor heating mats have gained many approvals around the world, including the German VDE - probably the highest standard in Europe.
Lifetime guarantee is available for Elektra MD Underfloor heating mats and UK based technical support for the installation / operating of the underfloor heating is provided by our experienced & qualified technicians.
|Min Installation Temp||-5oC|
|Max Working Temp||+95oC|
|Cold Tail||1No. 4 metres long - 3 cores|
|Insulation||FEP (Teflon) + XLPE|
|Output Power Tollerance||+5%, -10%|
|Min Bending Radius||5D|