Adept UltraSlim Water Underfloor Heating Kits
Adept UltraSlim Underfloor Heating is the Premier Heating Kit, including an A Rated Pump and 12mm PERT Pipe.
Adept UltraSlim Heating Kits are all designed for a single zone, however can be adjusted with the use of any Adept or Heatmiser controls from within our store. Each Kit is designed to use 150mm centres using a 18mm Grooved High Density Board. The Kits are designed to output 100w/m2.
Finished floors, such as tiles can be installed directly on Ultraslim panels without the need for over-boarding.
The Kits Contents:
Kit Size (m2) | 12 | 21 | 25 | 33 | 39 | 51 | 63 | 75 | 84 | 90 | 97 |
Single Loop Control Pack | ![]() |
||||||||||
Manifold & Control Pack | ![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
|
Manifold Ports | 2 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 8 | 9 | |
Pipe Length (m) | 85 | 140 | 170 | 225 | 280 | 365 | 450 | 535 | 590 | 620 | 675 |
Pipe Connectors | ![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
Retrofix Panels | 27 | 46 | 55 | 73 | 86 | 112 | 138 | 165 | 184 | 197 | 142 |
Notes:
- Vinyl & Carpet floor finishes will need over-boarding with minimum 6mm plywood before you install the floor finish.