Heat Base Waterproofing Membrane suitable for Electric Underfloor Heating.
Heat Base is a Polypropylene uncoupling crack isolation waterproofing membrane made for use with Electric Underfloor Heating. Heat Base uncoupling membrane has rounded square shaped reliefs which allow the Elektra DM10 Heating Cable to easy fit into the pre-groved channels.
Heat Base is very flexible and easy to use and cut into shape for the requirements of any shaped room, allowing you to get the maximum coverage for the Elektra DM10 Under-tile Heating Cable.
Heat Base Membranes unique design allows for:
• Flexible heating zone selection
• Cost and time saving installation
• Uncoupling crack isolation
• Vapor management
• Support load distribution
• Small height increase 5.5mm (1/4 inch)
Uheat supplies this with a Under floor Heating system which will provide a more comfortable heat in a small living room. Covering the cable with either flexible tile adhesive or self levelling compound and provide an electrical supply
Manufactured in Europe complying with ISO 9001 using the highest quality raw materials, in accordance with IEC EN 60335-2-96. Elektra electric underfloor heating mats have gained many approvals around the world, including the German VDE - probably the highest standard in Europe.
Lifetime guarantee is available for Elektra MD Underfloor heating mats and UK based technical support for the installation / operating of the underfloor heating is provided by our experienced & qualified technicians.
|Cable Thickness||4.3mm (Max)|
|Min Installation Temp||-5oC|
|Max Working Temp||+110oC|
|Cold Tail||1No. 2.5 metres long - 3 cores|
|Insulation||FEP (Teflon) + XLPE|
|Outer Sheath||Heat Resistant PVC|
|Output Power Tollerance||+5%, -10%|
|Min Bending Radius||5D|