Manual Dial thermostat utilised for the accurate control of electric underfloor heating
- Flush mounted in a standard flush back box.
- Integral on/off switch for when you do not require heating.
- Will control up to 3600W, 16Amp.
- With graduated scale (5 to 40oC), making it easy to set the required floor temperature.
- The scale can also be adjusted so that the min & max temperature are limited.
Remove the dial by just simply pulling, this should revel a screw, remove this to take the front plate of thermostat.
Terminate the thermostat as the diagram below shows.
The thermostat can now be fitted into wall mounted box, screwing the back case to the mount.
Replace the front of the thermostat and tighten the screw to secure the thermostat together before replacing the dial as well.
Click here to download the manual.
Standard Delivery - 3 to 5 Working Days Express Delivery - 1 to 2 Working Days All our orders are dispatched via Royal Mail, APC Overnight Courier, Fedex or Fortec Pallet Network. All consignments will require a signature so please ensure that the delivery address will have someone available to sign for the goods. Due to additional charges imposed by our couriers for deliveries to the Scottish Highlands, offshore islands and Northern Ireland, a surcharge may be levied to cover carriage to these areas (listed below). We advise customers to contact us for a final postage fee before finalising orders. AB31 to AB38, AB41 to AB45, AB 51 to AB56, BT, FK19 to FK 21, HS1 to HS9, IV1 to IV28, IV30 to IV32, IV36, IV40 to IV49, IV51 to IV56, KA27 to KA28, KW1 to KW3, KW5 to KW17, PA20 to PA49, PA60 to PA78, PH1, PH5 to PH10, PH15 to PH26, PH30 to PH44, TR, GY & E1 to ZE3.;