 |
MD100 |
Elektra
MD100 Underfloor Heating Mats are ready to install heating elements.
Consisting of a thin heating cable attached to a glass fibre mesh,
the system is designed for indoor use to give a warm floor effect.
It should be installed directly under a surface to be heated, in
either flexible tile adhesive or self levelling compound.
For installation onto timber floor bases or insulation
boards |
|
|
MD160 |
Elektra
MD160 Under floor Heating Mats are ready to install heating elements.
Consisting of a thin heating cable attached to a glass fibre mesh,
the system is designed for indoor use to act as a full heating
system. It should be installed directly under a surface to be
heated, in either flexible tile adhesive or self levelling
compound.
For installation onto concrete floor bases or
insulation boards |
|
|
MD200 |
Elektra
MD200 Undertile Heating Mats are ready to install
heating elements. Consisting of a thin heating cable attached to a
glass fibre mesh, the system is designed to act as a full heating
system within conservatories or other high
heat-loss rooms. It should be installed directly under a surface to be
heated, in either flexible tile adhesive or self levelling
compound.
For installation onto concrete floor bases or
insulation boards |
 |
UltraTec |
Elektra UltraTec
Undertile
Heating Cables are ready to install heating elements. Consisting of a
thin 2 x 3mm heating cable, the system is
designed to provide a warm floor or to act as a full heating system
depending on how far apart the cables are laid. It should be
installed directly under a surface to be heated, in either flexible
tile adhesive or self levelling compound. |
 |
VCD17 |
Elektra
VCD17 In-screed Heating Cables are ready to install heating
elements. Consisting of a thin heating cable, the system is
designed to provide a warm floor or to act as a full heating system
depending on how far apart the cables are laid. The cable should be
installed with a minimum of 50mm of screed. |
